[RULE] Slinky 0.4.7 first test

Richard Kweskin rkwesk at hellug.gr
Sat Feb 26 12:01:01 EET 2005


Hello All

This first go leaves the config file with Slinky 0.4.7 unchanged, the minimum pack list option is yes, and no documentation is yes. Method was cdrom.

Booted with linux ide=nodma (didn't seem to matter.) Install was ok and subsequent reboot was ok. Here are the noteworthy bits:

1 - Warnings on rpmnew and rpmorig - significant?
2 - Warnings on scriplet failures - significant?
3 - Only by going to tty2 just before responding to whether to install lilo and editing /etc/lilo.conf in order to add (essential in this case) append="ide=nodma". Suggestion: put this as default since it's easy to take out afterwards. The reverse results in endless delays until the conf file is edited & lilo invoked.
4 - kudzu is not on by default. Suggestion: mention this in the dialogue of install so user is aware.
5 - No attempt is made to explain what "minimal" means. Suggestion: breaking pack lists down by use as Slinky 0.5.0 gives more power to user.
6 - Some options are eliminated by default in config file and user might not know, e.g. locales. Suggestion: mention this somewhere.
7 - Default timezone is est. Suggestion: mention this somewhere.

What follows are readouts of (a) test form (b) dmesg (c) df -h (d) free

The install log is a seperate posting.
===================
  PC OWNER : Richard Kweskin, rkwesk at hellug.gr
(let's call this box rule-115 to distinguish it from others I have submitted)
        BOX TYPE :mini tower
        BRAND OF PC :Turbo-x (Greek clone using Taiwan bits)
        CPU :pentium 1
        CPU SPEED :133
        MOTHERBOARD :Soyo sy 5va
        RAM SIZE :32MB
        RAM TYPE :1x32MB dimm (slowest type)
        HD SIZE :2.1GB
        HD MODEL :WD Caviar 12100
        HD BUS :ide
        CDROM MODEL :Hitachi
        CDROM SPEED :
        CDROM BUS :atapi (eide)
        GRAPHIC CARD MODEL :Hercules Terminator 64 video (S3 ViRGE)
        GRAPHIC CARD RAM :2MB
        GRAPHIC CARD BUS :pci
        MOUSE :Microsoft 2 button, serial
        KEYBOARD :101 key clone
        MODEM INTERNAL:srfaxmodem (not pnp)
        MODEM EXTERNAL :none
        MODEM INTERNAL BUS :isa
        MODEM EXTERNAL :n/a
        SOUND CARD :none
        SOUND CARD BUS :n/a
        NETWORK CARD :rtl 8139c
        NETWORK CARD BUS :pci
        OTHER CARD :none
        MONITOR TYPE :crt
        MONITOR SIZE :15 inch
        MONITOR RESOLUTION :1280x1024 (max
        MONITOR DEPTH :unknown
        MONITOR FREQ VERT :47-130Hz
        MONITOR FREQ HORZ :30-69KHz
        PRINTER :
================================

Linux version 2.6.9-1.667  bhcompile at tweety.build.redhat.com  (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:31 EST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000002000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
32MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 8192
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 4096 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: Unable to locate RSDP
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=linux ro root=305 BOOT_FILE=/boot/vmlinuz-2.6.9-1.667 ide=nodma
ide_setup: ide=nodmaIDE: Prevented DMA
Initializing CPU#0
CPU 0 irqstacks, hard=c03de000 soft=c03dd000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 132.682 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 28356k/32768k available (2096k kernel code, 3980k reserved, 654k data, 144k init, 0k highmem)
Calibrating delay loop... 259.07 BogoMIPS (lpj=129536)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 000001bf 00000000 00000000 00000000
CPU: After vendor identify, caps:  000001bf 00000000 00000000 00000000
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After all inits, caps:        000001bf 00000000 00000000 00000000
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 383k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=0
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1109306840.790:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 809E56CC6E860926
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16450
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 0000:00:07.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: WDC AC12100L, ATA DISK drive
hdb: HITACHI CDR-7930, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 4124736 sectors (2111 MB) w/256KiB Cache, CHS=4092/16/63
hda: cache flushes not supported
 hda: hda1 hda2 < hda5 >
hdb: ATAPI 8X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 128 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 585)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 144k freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 4 roles, 280 types, 16 bools
security:  53 classes, 5494 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev hda5, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
spurious 8259A interrupt: IRQ7.
inserting floppy driver for 2.6.9-1.667
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0x6100, 00:50:bf:72:47:51, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8139C'
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on hda5, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
cdrom: open failed.
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 159224k swap on /dev/hda1.  Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0371a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
SELinux: initialized (dev fd0, type vfat), uses genfs_contexts
===================
Filesystem            Size  Used Avail Use% Mounted on
/dev/hda5             1.8G  337M  1.5G  20% /
none                   15M     0   15M   0% /dev/shm
/dev/fd0              1.4M   42K  1.4M   3% /mnt/floppy
===================
             total       used       free     shared    buffers     cached
Mem:         28932      19292       9640          0       1308       7956
-/+ buffers/cache:      10028      18904
Swap:       159224       3820     155404

_______________________________________________
Original home page of the RULE project: www.rule-project.org
Rule-list at rule-project.org
http://mail.rule-project.org/mailman/listinfo/rule-list_rule-project.org



This full static mirror of the Run Up to Date Linux Everywhere Project mailing list, originally hosted at http://lists.hellug.gr/mailman/listinfo/rule-list, is kept online by Free Software popularizer, researcher and trainer Marco Fioretti. To know how you can support this archive, and Marco's work in general, please click here