[RULE] Networking with RULE

[David]

Hi Rodolfo,

Here gons with the questions you ask!

>
>Unfortunately, the question is not very clear. Can you please provide
>more information? Here are some things I'd like to see so we can help
>you better:
>
> * Make and model of Ethernet cards you are using
>  
>
I know they are  Realtek card but I dont know which model. Is there a
command that I can issue to find out?

> * Which Ethernet card is internal and which is external
>  
>
Both cards are internal

> * Contents of /etc/modprobe.conf
>  
>
There is no /etc/modprobe.conf on  the box (!)

> * Contents of /etc/sysconfig/network
>  
>
NETWORKING=yes
HOSTNAME=digital
GATEWAY=10.10.10.254                             <<<<<  How
interesting!!!!!!

> * Contents of /etc/sysconfig/network-scripts/ifcfg-eth0
>  
>
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=dhcp

> * Contents of /etc/sysconfig/network-scripts/ifcfg-eth1
>  
>
DEVICE=eth1
ONBOOT=yes
BOOTPROTO=static
IPADDR=10.10.10.100
NETMASK=255.0.0.0

> * Output of "ip addr show"
>  
>
1: lo: <LOOPBACK,UP> mtu 16436 qdisc no queue
link/loopback 00:00:00:00:00:00 brd  00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pf ifo_fast qlen 100
link/ether 00:50:fc:63:f4:56 brd  ff:ff:ff:ff:ff:ff
inet 82.3.210.218/24 brd 127.255.255.255 scope global eth0
3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pf ifo_fast qlen 100
link/ether 00:06:4f:0d:1a:86 brd  ff:ff:ff:ff:ff:ff
inet 10.10.10.100/8 brd 10.255.255.255 scope global eth1

> * Output of "ip route show"
>  
>
82.3.210/24 dev eth0 proto kernel scope link scr83.3.210.218
169.254.0.0/16 dev eth1 scope link
10.0.0.0./8 dev eth1 scope link
127.0.0.0/8 dev lol scope link
default via 10.255.255.254 dev eth1    <<<<< this looks a bit odd????

> * Output of "ifconfig"
>  
>

>eth0 Link encap:Ethernet HWaddr 00:50:fc:63:f4:56    
>

>inet addr:82.3.210.218 Bcast 255.255.255.255 Mask 255.255.255.0
>  
>
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    Rx packets: 26001 errors:0 dropped:0 overruns:0 frame:0
    Tx packets: 1 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:100
    Rx bytes:1570993 (1.4Mb) TX bytes:6720 (6.5 Kb)
    Interupt:10 Base address:0xb800

>eth1 Link encap:Ethernet HWaddr 00:06:4f:0d:1a:86    
>
inet addr:10.10.10.100 Bcast 105.255.255.255 Mask 255.0.0.0

    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    Rx packets: 0 errors:0 dropped:0 overruns:0 frame:0
    Tx packets: 112 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:100
    Rx bytes:0 (0.0Mb) TX bytes:6720 (6.5 Kb)
    Interupt:11 Base address:0xdc00

lo     Link encap:Local loopback
        inet addr:127.0.0.1 Mask 255.0.0.0
       UP LOOPBACK RUNNING MTU:16436 Metric:1
    Rx packets: 46 errors:0 dropped:0 overruns:0 frame:0
    Tx packets: 46 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:
    Rx bytes:3612 (3.5Kb) TX bytes:3612 (3.5Kb)


>Hopefully that will be enough for us to figure out the problem.
>
>  
>
Yes I hope so!

Thanks in advance

Best wishes

David



_______________________________________________
Original home page of the RULE project: www.rule-project.org
Rule-list at rule-project.org
http://mail.rule-project.org/mailman/listinfo/rule-list_rule-project.org